Announcement

Collapse
No announcement yet.

Magico M2 Speaker Debuts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Magico M2 Speaker Debuts



    Magico M2

    State of the Art Loudspeaker, Floor standing, 3-way (Four Driver) Design

    Click image for larger version  Name:	image_16538.jpg Views:	1 Size:	207.9 KB ID:	103427

    HAYWARD, CA (USA) – December 7, 2018 – Magico, the Leader in High-Performance Loudspeaker Design and Manufacture, is pleased to announce the M2 which expands the M-Series product lineup and features many ground-breaking engineering designs distilled from the M6 and M3.

    Our materials science research in the properties and applications of carbon allows the M2 to feature a new monocoque enclosure. Similar in construction technique introduced in the M6, it is formed using multiple layers of carbon fiber adding up to a 3/8” thickness. Similar to the external shell of an F-35 fighter jet, this enclosure construction compared to machined or extruded aluminum parts increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.

    The M2 incorporates a 28-mm Diamond coated Beryllium dome tweeter with optimized geometry. The Diamond coating on the Beryllium dome increases the stiffness without adding the extra weight of a pure Diamond dome and offers a near perfect stiffness to weight ratio that is unmatched in the industry. This revolutionary tweeter design provides extra-long excursion movement and uses a customized neodymium- based motor system that matches the sensitivity and power handling capabilities of the M2 while maintaining ultra-wide dispersion characteristics and ultra-low distortion measurements.

    Magico is the world’s first audio product manufacturer to utilize graphene in the development of a radically new and advanced loudspeaker cone design. Graphene has many extraordinary properties and is rated to be 100 times stronger than the strongest steel. The newly designed Magico six-inch midrange driver and seven- inch bass driver cones found in the M2 are both manufactured using Multi-Wall carbon XG Nanographene with a new ultra-stiff proprietary carbon weave which is 20% lighter and 300% stiffer than cone materials used in previous Magico product offerings. The midrange driver features an underhung neodymium-based motor system that uses two extra-large magnets which provide an ultra-stabilized magnetic field for the pure Titanium voice coil to operate within. This radical new driver design sets a new industry benchmark for performance and the minimization of total harmonic distortion.

    A purpose built sub-enclosure formed of a proprietary polymer houses the midrange driver to optimize the control and articulation of mid-band frequencies and provides protection from the massive back wave pressure of the bass drivers. Midrange sub-enclosures using different shapes, sizes and materials have been implemented throughout the history of Magico 3-way loudspeaker designs.

    The dual bass drivers in the M2 are vertically aligned to achieve ideal room integration and reproduce the lowest registers of bass frequency with speed and accuracy. Combined, the bass drivers are optimized for minimal music related distortions in the frequency and time domain using the latest state-of-the-art FEA simulation of acoustics, mechanics, electromagnetic and thermal behavior. The testing process is now completed on a single platform allowing optimization levels to be taken to a higher level.

    An internal three-axis matrix framework along with three tension rods running front to back internally, contribute to an extremely rigid enclosure which eliminates unwanted resonances and colorations, allowing all drivers to perform with stunning resolution and dynamics. All four drivers in the M2 are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that includes state-of-the-art components from Mundorf of Germany. The MPOD 3-Pt stand contributes to the overall sonic performance by converting mechanical energy to heat through the science of constrained layer damping, while providing ideal coupling to the floor.

    Click image for larger version  Name:	image_16539.jpg Views:	1 Size:	262.9 KB ID:	103428

    Driver Complement

    1” MBD5D Tweeter (x1)
    6” MAG60004RTC Graphene Nano-Tec Midrange (x1)
    7” MAG70008RT Graphene Nano-Tec Bass (x2)

    Specifications

    Sensitivity: 88dB
    Impedance: 4 ohms
    Frequency Response: 26 Hz-50 kHz
    Recommended Power: 50W rms
    Dimensions: 18” x 17.5” x 45” (w/ MPod Stand) 165 lbs. (w/ MPod Stand)
    Ship date: 1st Quarter 2019

    SRP US $ 56,000 /pair
    M2 MPOD 3pt StandUS $7,600 /pair (optional)
    Myles B. Astor, PhD, Administrator
    Senior Editor, Positive-Feedback.com
    ________________________________________

    -Zellaton Plural Evo speakers
    -Goldmund Telos 300 stereo amp
    -Goldmund Mimesis 37S Nextgen preamplifier
    -Doshi EVO and Goldmund PH3.8 phonostage
    -VPI Vanquish direct-drive turntable
    -VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
    -Lyra Atlas SL Lambda, Fuuga Mk. 2, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
    -Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
    -Assorted cables including Transparent XL Gen. 6, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
    -Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz 3 racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA OHIO Class 2.1+ platforms.

  • #2
    Have you heard them Myles? Thoughts?
    Speakers: Horning Eufrodite Ellipse III on Stillpoints Ultra 5S feet
    Speakers: REL Acoustics G1 Mark II Subs (pair)
    Tube Amplifier: New Audio Frontiers Ultimate 211 Special Edition Monoblocks
    SS Amplifier: Plinius SA-Reference
    Preamp: TW Acustic RPA-100 Line Stage
    Phono Stage: TW Acustic RPS-100
    Turntable - TW Acustic Raven AC w/ Black Knight Anniversary Upgrades
    Tonearm: Kuzma 4-Point 14" with Air Tight Opus-1 Cartridge (w/ EM/IA 1:20 Silver Wire SUT)
    Tonearm: TW 10.5" with Miyajima Zero Mono
    Vinyl Care: Furutech DF-2 LP Flattener - Degritter Ultrasonic & VPI Cyclone RCM
    Tape: Tascam 42B-NB (Refurb by Soren Wittrup)
    Tape Stage: Doshi V.3 Tape Stage
    CD/SACD: Playback Designs MP-5
    Streamer/Server: Aurender N30SA, Ediscreation Silent Switch OCXO w/ Ediscreation Silver reference LAN cable
    DAC: Lampizator Golden Gate2

    Power Conditioner: (2) Silver Circle Audio TCHAIK 6
    Wire: Custom Furutech PC's + Audience Front Row IC's & Speaker Cables
    Tweaks: Stillpoints Aperture II Panels & Stillpoints Ultra 5S's & SS's sprinkled about - DS Audio ION-001 Vinyl Ionizer - SRA Scuttle III Rack, SRA Ohio Class and Symposium Super Plus Platforms

    Comment


    • #3
      We have our M2/Mpods on order for our Rhapsody demo pair. Also have people thinking of placing orders for the M2's based on M3 and A3 listening.
      RHAPSODY.AUDIO

      http://www.rhapsody.audio




      Pilium Audio, Magico, Alsyvox, Bayz Audio, Diesis Audio, Kondo, Nordost Supreme Reference Dealer, VYGER, VYDA Cables, Constellation, Taiko Audio - Extreme server, Aqua Acoustic Quality, Raidho, TechDAS, Critical Mass Systems, Aurender, TelluriumQ, CMS/Center Stage, Devialet, REL Acoustics, RD Acoustics

      Comment


      • #4
        Looks quite nice!

        Comment

        Working...
        X