Announcement

Collapse
No announcement yet.

Hello

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello

    I found this forum as a result of a search for information on Magico's M3. I have a pair of these babies on order and expect them to be delivered in October. I'm currently using a pair of the Company's S1 Mk II speakers. If they are any indication of what is in store for me, I am going to need additional sets of underwear. Also had the opportunity to tour the Magico factory a few weeks ago and hear the M3's. I'm not going to draw any conclusions based on that experience because my front end and my room are so much different from what Alon has in his shop. I was attracted to Magico due to my small listening room and issues I have had with ported speakers. The sealed design Magico employs appealed to me. The S1's were a joy to place and are giving me all the soundstage and accuracy I could hope for. I think I can add something to the discussion on Magico's products when I finally get the equipment in place and broken in.

    Cincy

  • #2
    Welcome Cincy2! I've not heard any of the Magico speakers, but from what I've read I know I must. Looking forward to your impressions of the M3's. What components do you have in your setup?
    Dynavector DV20x2L MC cartridge - Genesis G7.1f speakers - Marantz Reference PM-KI-Pearl Int. Amp. - Oracle Audio Paris MkV turntable - Various Morrow & Valab/King cables

    Comment


    • #3
      Welcome
      Chris
      ----------------------------------------------------------------
      Kef 201/2, Pass xa30.5, W4S STP-SE, Manley Chinook, VPI Classic, Dynavector DV20x2L, ExaSound e32, Acoustic Zen cables. (Office): Vincent SP331 Mkll, Quicksilver Pre, Lumin D1, (Ken Lau Signiture Edition PSU), Bryston BCD-1, Vapor Audio Breeze, WooAudio W6se,Questyle Audio CMA800R LCD-3,HD800s, HD600, Mr Speaker Ether C Flow,

      Comment


      • #4
        Originally posted by Johnny Vinyl View Post
        Welcome Cincy2! I've not heard any of the Magico speakers, but from what I've read I know I must. Looking forward to your impressions of the M3's. What components do you have in your setup?
        Hi Johnny V.

        dCS Vivaldi Upsampler, DAC and Master Clock
        Mac Mini with Audirvana
        D'Agostino M400 monoblocks
        Transparent interconnects and speaker cables

        Cincy

        Comment


        • #5
          Welcome and congratulations on the incoming Magico's!
          SOURCE: VINYL - EAT C-Sharp with, EAT LPS power supply, My Sonic Lab Signature Gold
          DIGITAL - Mola Mola Tambaqui DAC. Roon Nucleus w/EAT Lps power supply. Auralic Aires G1
          PHONOSTAGE: AudioNet PAM G2 with AudioNet EPX power supply.
          PREAMP: Audionet PRE G2.
          AMPLIFIER: Audionet MAX monoblocks.
          SPEAKERS: YG Acoustics Anat III Signatures (upgraded to Sonja 1.2) JL Audio F112 V2 (x2)
          CABLES: Kubala-Sosna, Kubala Sosna Xpander.....Audio Desk Systeme RCM, Adona Rack, GIK & Acoustimac room treatment, Isoacoustics

          Comment


          • #6
            Originally posted by Cincy2 View Post
            I found this forum as a result of a search for information on Magico's M3. I have a pair of these babies on order and expect them to be delivered in October. I'm currently using a pair of the Company's S1 Mk II speakers. If they are any indication of what is in store for me, I am going to need additional sets of underwear. Also had the opportunity to tour the Magico factory a few weeks ago and hear the M3's. I'm not going to draw any conclusions based on that experience because my front end and my room are so much different from what Alon has in his shop. I was attracted to Magico due to my small listening room and issues I have had with ported speakers. The sealed design Magico employs appealed to me. The S1's were a joy to place and are giving me all the soundstage and accuracy I could hope for. I think I can add something to the discussion on Magico's products when I finally get the equipment in place and broken in.

            Cincy
            Glad to have you aboard Cincy!



            Congrats and looking forward to your comments! I expect you should have similar results with your D'Ag amplifiers. Dan's amps can control pretty much any speaker out there and their neutrality should work well with the M3s.

            Know that patience isn't exactly in the audiophile dictionary but know I'd be marking the days off the calendar until my speakers arrived. Of course then begins the break-in process!
            Myles B. Astor, PhD, Administrator
            Senior Editor, Positive-Feedback.com
            ________________________________________

            -Zellaton Plural Evo speakers
            -Goldmund Telos 300 stereo amp
            -Goldmund Mimesis 37S Nextgen preamplifier
            -Doshi EVO and Goldmund PH3.8 phonostage
            -VPI Vanquish direct-drive turntable
            -VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
            -Lyra Atlas SL Lambda, Fuuga Mk. 2, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
            -Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
            -Assorted cables including Transparent XL Gen. 6, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
            -Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz 3 racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA OHIO Class 2.1+ platforms.

            Comment


            • #7
              Welcome, Cincy, and congrats on a great pair of speakers!
              Kronos Sparta -> Trinity Phono -> Trinity Pre -> CH Precision A1 -> Magico S7s

              Comment


              • #8
                Congratulations on your new speakers. They are my current dream speakers if I ever replace my beloved Mini IIs. I look forward to your contributions to the forum.
                System link: https://www.whatsbestforum.com/threa...l-sound.32867/
                Micro Seiki SX8000 II, SME 3012R, vdH Colibri GC 0.25 mV
                Lamm LP2.1 Deluxe, Lamm LL1 Signature, Lamm ML2.
                Vitavox CN-191 corner horns, NOS cables, Ching Cheng power cords

                Comment


                • #9
                  Originally posted by MylesBAstor View Post

                  Know that patience isn't exactly in the audiophile dictionary but know I'd be marking the days off the calendar until my speakers arrived. Of course then begins the break-in process!
                  Counting hours not days. :-)

                  Comment

                  Working...
                  X