Announcement

Collapse
No announcement yet.

Hello from Triode Pete

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello from Triode Pete

    Hello - Just like to introduce myself... Pete, the chief bottle washer & cook from Triode Wire Labs, based in New York.

    I have three hi-fi rigs in my home, in which I get great pleasure from...

    Looking to contribute my $0.02 here...

    Happy New Year!
    Pete
    Well Tempered Reference turntable/ Clearaudio Maestro 2... CD Player: Goldenote Stibbert IV with 60's Mullard 6DJ8's... Preamp: Loesch & Wiesner Western Electric 417A w/Phono & Line Stage... Amplifier: BorderPatrol S10 EXD with Western Electric 300B tubes... Power Conditioner: PI Audio Group UBER buss w/ Furutech receptacles... Cables: Triode Wire Labs Cable loom... Speaker: 1974 Klipsch Klipschorn (KB-RO), hot-rodded with all Volti Audio horns and drivers, including the Volti Audio crossover.

  • #2
    Welcome, and Happy New Year!
    SOURCE: VINYL - EAT C-Sharp with, EAT LPS power supply, My Sonic Lab Signature Gold
    DIGITAL - Mola Mola Tambaqui DAC. Roon Nucleus w/EAT Lps power supply. Auralic Aires G1
    PHONOSTAGE: AudioNet PAM G2 with AudioNet EPX power supply.
    PREAMP: Audionet PRE G2.
    AMPLIFIER: Audionet MAX monoblocks.
    SPEAKERS: YG Acoustics Anat III Signatures (upgraded to Sonja 1.2) JL Audio F112 V2 (x2)
    CABLES: Kubala-Sosna, Kubala Sosna Xpander.....Audio Desk Systeme RCM, Adona Rack, GIK & Acoustimac room treatment, Isoacoustics

    Comment


    • #3
      Welcome Pete!
      [TURNTABLE] TW Acustic Raven One [TONEARM] Dynavector DV 507Mkii & Graham Phantom [PHONO] BAT VK-P10 & Dynavector PHA200; [CARTRIDGE] Dynavector XV1S, Lyra Kleos, Ortofon Cadenza Mono [TAPE] Otari MTR15 & Technics RS1500 with JRF Headblock [DIGITAL] Grace Design M920, Lynx Auroa 8 ADC/DAC, Mac Mini with roon labs [PRAMP] McIntosh C2300 [AMP] McIntosh C601s [SPEAKERS] Legacy Audio Whisper & Wavelet [ACC] Klaudio Ultrasonic RCM

      Comment


      • #4
        OK, who left the back door open and let Pete in??

        Welcome Pete Happy New Year!!

        Beau
        Turntable: - 1. Fairchild 750/OMA slate plinth
        2. Analog Engineering AE-2008 MinusK support.
        Tonearm: 1. Schroder Custom
        2. Schick 12"
        3. Abis SA-1
        Cartridge: Miyajima Kansui and Premium BE Mono
        PhonoPre: AprilSound LR, EMIA Strain Gauge, EMIA silver SUT
        CD: Wadia 860x
        Server: Innuos Zen Mini Mk3
        DAC: Computer Audio Design 1543 Mk2
        Preamp: Bent Audio TAP-X w silver autoformers
        Amplifier: AprilSound SET50 monoblocks
        Speaker: Pioneer PAX-30C

        Comment


        • #5
          Welcome Pete! May your valves glow in harmony in 2017.

          Comment


          • #6
            Welcome Pete
            Chris
            ----------------------------------------------------------------
            Kef 201/2, Pass xa30.5, W4S STP-SE, Manley Chinook, VPI Classic, Dynavector DV20x2L, ExaSound e32, Acoustic Zen cables. (Office): Vincent SP331 Mkll, Quicksilver Pre, Lumin D1, (Ken Lau Signiture Edition PSU), Bryston BCD-1, Vapor Audio Breeze, WooAudio W6se,Questyle Audio CMA800R LCD-3,HD800s, HD600, Mr Speaker Ether C Flow,

            Comment


            • #7
              Hiya Pete, I've heard your products along with Greg's speakers i see you have his horns and xovers, I'm interested in your initial impressions of the Volti Rival.
              TechDAS | Graham Eng | ZYX | B.M.C. | Boulder | Magico

              "Listening to Analogue music is an act of rebellion in a digital gulag" - Simon Yorke

              Comment


              • #8
                Welcome and I own a number of Pete's cables. All wonderfully good! And the price a true deal too.
                Dave Clark
                Editor and Publisher, Positive Feedback
                www.positive-feedback.com

                Comment


                • #9
                  Originally posted by Triode Pete View Post
                  Hello - Just like to introduce myself... Pete, the chief bottle washer & cook from Triode Wire Labs, based in New York.

                  I have three hi-fi rigs in my home, in which I get great pleasure from...

                  Looking to contribute my $0.02 here...

                  Happy New Year!
                  Pete
                  Hi Pete and welcome to our corner of the Net!



                  Look forward to your posts!
                  Myles B. Astor, PhD, Administrator
                  Senior Editor, Positive-Feedback.com
                  ________________________________________

                  -Zellaton Plural Evo speakers
                  -Goldmund Telos 300 stereo amp
                  -Goldmund Mimesis 37S Nextgen preamplifier
                  -Doshi EVO and Goldmund PH3.8 phonostage
                  -VPI Vanquish direct-drive turntable
                  -VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
                  -Lyra Atlas SL Lambda, Fuuga Mk. 2, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
                  -Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
                  -Assorted cables including Transparent XL Gen. 6, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
                  -Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz 3 racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA OHIO Class 2.1+ platforms.

                  Comment


                  • #10
                    Very nice to have you aboard Pete! Happy New Year.

                    Comment


                    • #11
                      Welcome to the thunderdome.

                      I see that you are still running a Well Tempered Lab Table. Do you find it a PITA to get a new cartridge dialed in right? I may have to pick your brain on that. And where do you find a new belt nowdays, not to mention bearing oil and dampening oil. As you might guess from the previous I have a Well Tempered which at times makes me Ill Tempered. Hmmm, I should use a different font as the capital i looks the same as the lower case L.

                      Comment


                      • #12
                        Welcome Pete.
                        analog stuff.
                        otari mtr 10 2 track 1/4 made new by soren
                        otari mtr 10 2 track 1/4 1/2 combo made new by soren
                        sota sapphire used eminent tech ver 2 arm
                        new sota nova table has magnetic levitation platter and full speed control and latest motor same arm as above
                        thorens td124 sme ver 2 arm
                        thorens td125 sme ver 2 arm
                        kenwood direct drive sme ver 2 arm
                        phono preamp Ml no 25 all re capped
                        speakers cust infinity IRS V , new caps and LPS , magnets etc.
                        mark levivson pre no 26 amps no 33
                        digital three cust servers , win ser 2016 , AO
                        Dacs lampi various

                        Comment


                        • #13
                          Welcome Pete!
                          Micro Seiki SX-8000 table with flywheel, SME 3012R arm, SME 312S arm, Lyra Etna SL and Dynavector XV-1S cartridges, ARC Ref 3 phono stage, Otari MX-55 tape deck, Ampex 350 repros, Roon Nucleus Plus server, PS Audio DSJ DAC, ARC Ref 6 pre, ARC Ref 75 amp, JBL 4345 speakers, and Def Tech Ref subs.

                          Comment


                          • #14
                            It's about time Pete, where have you been?

                            Comment


                            • #15
                              Originally posted by Rob View Post
                              Hiya Pete, I've heard your products along with Greg's speakers i see you have his horns and xovers, I'm interested in your initial impressions of the Volti Rival.
                              Hi Rob,
                              I've teamed-up with Greg Roberts (Volti) at two recent audio shows where Greg featured his new "Rival" speaker. This past summer Greg brought his "prototype" Rival to the Capital AudioFest. It was sold in 20 minutes! However, Gary Dews (from BorderPatrol) and I thought the Rival was a bit "raw" sounding and could use a few tweaks to improve its sound. Well, Greg did his homework and this past November brought a rosewood-finished pair of Rivals to the New York Audio Show. The sound was very refined while keeping everything balanced & very dynamic! Think of the Rival as the baby brother of the Vittora... The Rival uses the same hi-end drivers & similar mid-range & tweeter horns as the Vittora in a smaller bass-reflex cabinet...

                              Well Tempered Reference turntable/ Clearaudio Maestro 2... CD Player: Goldenote Stibbert IV with 60's Mullard 6DJ8's... Preamp: Loesch & Wiesner Western Electric 417A w/Phono & Line Stage... Amplifier: BorderPatrol S10 EXD with Western Electric 300B tubes... Power Conditioner: PI Audio Group UBER buss w/ Furutech receptacles... Cables: Triode Wire Labs Cable loom... Speaker: 1974 Klipsch Klipschorn (KB-RO), hot-rodded with all Volti Audio horns and drivers, including the Volti Audio crossover.

                              Comment

                              Working...
                              X