Announcement

Collapse
No announcement yet.

How to Add An Avatar or Add A Signature Line (s)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to Add An Avatar or Add A Signature Line (s)

    Since several people have run into this problem so I thought it might be useful to outline the steps.

    Actually it's very easy to do.

    Go to the navigator bar on the top of the screen, find your name to the far right, lightly tap to bring up the box and then click on the my profile box. You will come to a page with a blank avatar box. Hover on the bottom right side of the avatar box and a box should come up. Double click and that will take you to a page where you can choose your avatar. I think you will say aha after it's done!
    Myles B. Astor, PhD, Administrator
    Senior Editor, Positive-Feedback.com
    ________________________________________

    -Magico S5 Mk.2 speakers with SPod feet
    -Goldmund Telos 280 stereo amp
    -Goldmund Mimesis 37S Nextgen preamplifier
    -Doshi V3.0 phonostage
    -VPI Vanquish direct-drive turntable
    -VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
    -Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
    -Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
    -Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
    -Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms.

  • #2
    I must be blind because I don't see a pen icon next to my screen name. Only a green button that is not click-able.
    PROGRESSIVE SOUNDS FROM AROUND THE WORLD
    www.lasercd.com
    www.lasersedgegroup.com

    Rockport Aquila, Boulder 2010, Boulder 2008, Boulder 2060, Transparent Audio Reference XL, Nordost Quantum QBase8, TW Acustic AC Anniversary, TW Acustic Raven 10.5 arm, Lyra Atlas, Bricasti M1 Special Edition, SRA Scuttle3 rack + various SRA/Symposium stands

    Comment


    • #3
      My bad, my admin screen is slightly different. Corrected. The green "light" tells everyone you are online. Thanks Ken.
      Myles B. Astor, PhD, Administrator
      Senior Editor, Positive-Feedback.com
      ________________________________________

      -Magico S5 Mk.2 speakers with SPod feet
      -Goldmund Telos 280 stereo amp
      -Goldmund Mimesis 37S Nextgen preamplifier
      -Doshi V3.0 phonostage
      -VPI Vanquish direct-drive turntable
      -VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
      -Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
      -Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
      -Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
      -Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms.

      Comment


      • #4
        I got that. Can't figure out how to add the sig file.
        PROGRESSIVE SOUNDS FROM AROUND THE WORLD
        www.lasercd.com
        www.lasersedgegroup.com

        Rockport Aquila, Boulder 2010, Boulder 2008, Boulder 2060, Transparent Audio Reference XL, Nordost Quantum QBase8, TW Acustic AC Anniversary, TW Acustic Raven 10.5 arm, Lyra Atlas, Bricasti M1 Special Edition, SRA Scuttle3 rack + various SRA/Symposium stands

        Comment


        • #5
          I'm getting invalid image file from photobucket and choosing from my drive is turning up blank. Weird!

          Comment


          • #6
            Originally posted by lasercd View Post
            I got that. Can't figure out how to add the sig file.
            -Go to you "user settings" or click the "Edit Settings" button on your profile page, click the "Account" tab, scroll down to the "Conversion Detail Options" section, Click on the "Edit Post Signature" link.

            -The "edit Post Signature" Box will pop-up.

            -Write your signature in there and it will show up on every post you make (Past, Present, and Future).

            Note:there may be a delay on any post you make when you make it but a refresh of the screen will show it is there.

            Hope this helps,
            Dre
            **************************************************
            Every day is a good day to play analog.
            - 12" 33-1/3 RPM or 45 RPM vinyl
            - 10.5" 15ips or 30ips tape
            **************************************************
            Every day is a good day for live music.
            **************************************************

            Comment


            • #7
              Originally posted by Dre_J View Post

              -Go to you "user settings" or click the "Edit Settings" button on your profile page, click the "Account" tab, scroll down to the "Conversion Detail Options" section, Click on the "Edit Post Signature" link.

              -The "edit Post Signature" Box will pop-up.

              -Write your signature in there and it will show up on every post you make (Past, Present, and Future).

              Note:there may be a delay on any post you make when you make it but a refresh of the screen will show it is there.

              Hope this helps,
              Dre

              Thanks Andre. Ever the engineer!
              Myles B. Astor, PhD, Administrator
              Senior Editor, Positive-Feedback.com
              ________________________________________

              -Magico S5 Mk.2 speakers with SPod feet
              -Goldmund Telos 280 stereo amp
              -Goldmund Mimesis 37S Nextgen preamplifier
              -Doshi V3.0 phonostage
              -VPI Vanquish direct-drive turntable
              -VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
              -Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
              -Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
              -Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
              -Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms.

              Comment


              • #8
                Originally posted by MylesBAstor View Post


                Thanks Andre. Ever the engineer!
                You know what they say, Myles:

                You can take the person out of the engineering office, but you can't take the engineer out of the person!
                Last edited by Dre_J; 02-02-2016, 04:39 PM.
                **************************************************
                Every day is a good day to play analog.
                - 12" 33-1/3 RPM or 45 RPM vinyl
                - 10.5" 15ips or 30ips tape
                **************************************************
                Every day is a good day for live music.
                **************************************************

                Comment

                Working...
                X