Tweet
Not sure would use as a platter mat but looks like would be great to put on platter when not in use to prevent dust and dirt accumulation.
-
Myles B. Astor, PhD, Administrator
Senior Editor, Positive-Feedback.com
________________________________________
-Magico S5 Mk.2 speakers with SPod feet
-Goldmund Telos 280 stereo amp
-Goldmund Mimesis 37S Nextgen preamplifier
-Doshi V3.0 phonostage
-VPI Vanquish direct-drive turntable
-VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
-Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
-Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
-Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
-Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms. -
That's what I do with my Pro-Ject RPM-1 Carbon, though I use this instead. I I just keep it upside down to use as a dust / platter cover:Steve Lefkowicz
Senior Associate Editor at Positive Feedback
-
Analog 1: Linn LP12 (MOSE/Hercules II), Ittok, Dynavector 19a, iPhono2; Analog 2: Pro-Ject RPM-1 Carbon, Sumiko Pearl, iFi iPhono.
Digital: Samsung 300E5C notebook, JRiver Media Center 26, Tidal HiFi and Qobuz Studio), iFi NEO iDSD, iFi iDAC2, iFi iUSB3, iPurifier2.
Electronics: Burson Conductor Virtuoso, DIY switch-box with TKD 10K pot, Antique Sound Labs MG-SI15DT-S, Burson Timekeeper Virtuoso, Jolida JD1000P, B&K ST140.
Speakers: Tekton Double Impact, Tekton Lore, Magneplaner .7, ELAC Debut2 B6.2, Debut F5 and Debut B6, Emotiva Airmotiv B1, Sound Dynamics 300ti.
Interconnects: Morrow Audio MA1, Vermouth Audio Black Pearl, Nordost Solar Wind, Audioquest Evergreen
Speaker cables: Morrow Audio SP4, Vermouth Audio Red Velvet, Nordost Solar Wind, Nordost Flatline, Audioquest Q2.
Digital cables: Straightwire USB Link, Aural Symphonics Digital Standard xxv USB, Belkin PureAV.
Accessories: Sound Organization turntable shelf, Mondo racks, Pangea Audio Vulcan racks, Pi Audio Group Über BUSS, Monster HTS2000 power conditioner, Sound Organization speaker stands, Pangea Audio speaker stands, Kinetronics anti-static brush, Pro-Ject VC-S record cleaner, Spin Clean record cleaner.
Headphones: Schiit Valhalla amp, Meze Audio 99 Classic and 99 Neo, Beyerdynamic DT770Pro, 1More Triple Driver Over Ear, 1More MK801, 1More Triple Driver IEM
http://www.audionirvana.org/forum/ti...ounding-system -
Why not use an obsolete record as a platter dust cover?Comment
-
Bingo.Originally posted by Brf View PostAnalog: Forsell Air Reference, Transfiguration Proteus; VPI Prime Signature, VdH Crimson XGW, Transfiguration Phoenix S, VAS Nova Mono;
Unmounted: VAS Nova Signature, Symphonic Line RG-8
Digital: Mac mini 6,2 with YFS PS-12M LPS; Exogal Comet Plus, Exogal Ion PowerDAC
Electronics: Aurorasound Vida, Channel D Lino C; Merrill Cara, Gryphon XT MC; Merrill Thor, Gryphon M-100 Mkii
Cables: Morrow, Gryphon interconnects; YFS USB cable; Morrow, XLO, Channel D phono cables; Gryphon speaker cablesComment
-
Sure just thought looked cooler. $20 ain’t going to break the bank. I actually wanted the red platter mat but it is currently out of stock.Originally posted by Brf View PostMyles B. Astor, PhD, Administrator
Senior Editor, Positive-Feedback.com
________________________________________
-Magico S5 Mk.2 speakers with SPod feet
-Goldmund Telos 280 stereo amp
-Goldmund Mimesis 37S Nextgen preamplifier
-Doshi V3.0 phonostage
-VPI Vanquish direct-drive turntable
-VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
-Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
-Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
-Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
-Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms.Comment
-
The Hudson is white and matches the turntable. That's why i use it. I initially bought it to see it was any good for aligning cartridges in a low cost environment. It actually seems pretty easy to use and easier than the typical paper ones that never lie flat. For my Linn I'll stick with my Wally.
This is on loan and a pretty nice table for $500, but I will never buy a turntable that lacks a proper dust cover.Steve Lefkowicz
Senior Associate Editor at Positive Feedback
-
Analog 1: Linn LP12 (MOSE/Hercules II), Ittok, Dynavector 19a, iPhono2; Analog 2: Pro-Ject RPM-1 Carbon, Sumiko Pearl, iFi iPhono.
Digital: Samsung 300E5C notebook, JRiver Media Center 26, Tidal HiFi and Qobuz Studio), iFi NEO iDSD, iFi iDAC2, iFi iUSB3, iPurifier2.
Electronics: Burson Conductor Virtuoso, DIY switch-box with TKD 10K pot, Antique Sound Labs MG-SI15DT-S, Burson Timekeeper Virtuoso, Jolida JD1000P, B&K ST140.
Speakers: Tekton Double Impact, Tekton Lore, Magneplaner .7, ELAC Debut2 B6.2, Debut F5 and Debut B6, Emotiva Airmotiv B1, Sound Dynamics 300ti.
Interconnects: Morrow Audio MA1, Vermouth Audio Black Pearl, Nordost Solar Wind, Audioquest Evergreen
Speaker cables: Morrow Audio SP4, Vermouth Audio Red Velvet, Nordost Solar Wind, Nordost Flatline, Audioquest Q2.
Digital cables: Straightwire USB Link, Aural Symphonics Digital Standard xxv USB, Belkin PureAV.
Accessories: Sound Organization turntable shelf, Mondo racks, Pangea Audio Vulcan racks, Pi Audio Group Über BUSS, Monster HTS2000 power conditioner, Sound Organization speaker stands, Pangea Audio speaker stands, Kinetronics anti-static brush, Pro-Ject VC-S record cleaner, Spin Clean record cleaner.
Headphones: Schiit Valhalla amp, Meze Audio 99 Classic and 99 Neo, Beyerdynamic DT770Pro, 1More Triple Driver Over Ear, 1More MK801, 1More Triple Driver IEM
http://www.audionirvana.org/forum/ti...ounding-systemComment
-
Why not use a traditional style dustcover over the turntable when not in use? You know, so you don't have to dust the tonearm, cartridge and every part of the turntable exposed to room atmosphere.
-Stevewebmaster at The Analog Dept.
system list:Classe' CAP 151 integrated, Carver TX-11b Tuner, NHT 2.9 Speakers, Thorens TD124 ( plus other Thorens models), Otari MX-5050 BII-2 R2R, Jolida JD100 cd player, ML-9600 digital recorderComment
-
I full proper dust cover for a $500 table costs almost as much as the table. That's one of the reasons my son uses a Music Hall. $750 but it sounds great and included a proper hinged dust cover.Originally posted by user510 View PostSteve Lefkowicz
Senior Associate Editor at Positive Feedback
-
Analog 1: Linn LP12 (MOSE/Hercules II), Ittok, Dynavector 19a, iPhono2; Analog 2: Pro-Ject RPM-1 Carbon, Sumiko Pearl, iFi iPhono.
Digital: Samsung 300E5C notebook, JRiver Media Center 26, Tidal HiFi and Qobuz Studio), iFi NEO iDSD, iFi iDAC2, iFi iUSB3, iPurifier2.
Electronics: Burson Conductor Virtuoso, DIY switch-box with TKD 10K pot, Antique Sound Labs MG-SI15DT-S, Burson Timekeeper Virtuoso, Jolida JD1000P, B&K ST140.
Speakers: Tekton Double Impact, Tekton Lore, Magneplaner .7, ELAC Debut2 B6.2, Debut F5 and Debut B6, Emotiva Airmotiv B1, Sound Dynamics 300ti.
Interconnects: Morrow Audio MA1, Vermouth Audio Black Pearl, Nordost Solar Wind, Audioquest Evergreen
Speaker cables: Morrow Audio SP4, Vermouth Audio Red Velvet, Nordost Solar Wind, Nordost Flatline, Audioquest Q2.
Digital cables: Straightwire USB Link, Aural Symphonics Digital Standard xxv USB, Belkin PureAV.
Accessories: Sound Organization turntable shelf, Mondo racks, Pangea Audio Vulcan racks, Pi Audio Group Über BUSS, Monster HTS2000 power conditioner, Sound Organization speaker stands, Pangea Audio speaker stands, Kinetronics anti-static brush, Pro-Ject VC-S record cleaner, Spin Clean record cleaner.
Headphones: Schiit Valhalla amp, Meze Audio 99 Classic and 99 Neo, Beyerdynamic DT770Pro, 1More Triple Driver Over Ear, 1More MK801, 1More Triple Driver IEM
http://www.audionirvana.org/forum/ti...ounding-systemComment
-
OK..that's one reason in favor of the platter mat cover I hadn't thought of.
-Steve -
A dust cover won’t work with my table. The arms stick out to much from the sides of the table. And only going to get worse with the new VPI 14-inch arm with no offset on the way. -
I've noticed very few really high end or expensive turntables come with or will work with a dust cover. But that's totally fine. $300 to $1000 for a large cover for a table when not in use isn't a large percentage of a turntable priced in the five to six figure range.
-
-
Myles B. Astor, PhD, Administrator
Senior Editor, Positive-Feedback.com
________________________________________
-Magico S5 Mk.2 speakers with SPod feet
-Goldmund Telos 280 stereo amp
-Goldmund Mimesis 37S Nextgen preamplifier
-Doshi V3.0 phonostage
-VPI Vanquish direct-drive turntable
-VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
-Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
-Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
-Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
-Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms.Comment
-
I really dig the look and the color when lights shines on the platter pad. Plus keeps dirt off between listening sessions.
Myles B. Astor, PhD, Administrator
Senior Editor, Positive-Feedback.com
________________________________________
-Magico S5 Mk.2 speakers with SPod feet
-Goldmund Telos 280 stereo amp
-Goldmund Mimesis 37S Nextgen preamplifier
-Doshi V3.0 phonostage
-VPI Vanquish direct-drive turntable
-VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
-Lyra Atlas SL Lambda, Fuuga, vdh Colibri Master Signature, MutechHayabusa, MOFI Master Tracker, Sumiko Songbird cartridges
-Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
-Assorted cables including Transparent XL Gen. 5, Skogrand, Viero, Kubala-Sosna, Audience Au24SX, Genesis Advanced Technologies and Ensemble Power Cords
-Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA platforms.Comment
Comment