Tweet
One turntable that can support three tonearms.
What arms do you pick? Go crazy!
What arms do you pick? Go crazy!
-
Myles B. Astor, PhD, Administrator
Senior Editor, Positive-Feedback.com
________________________________________
-Zellaton Plural Evo speakers
-Goldmund Telos 440 and 1000 Nextgen mono amps
-Goldmund Mimesis 37S Nextgen preamplifier
-Doshi EVO and Goldmund PH3.8 phonostage
-VPI Vanquish direct-drive turntable
-VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
-Lyra Atlas SL Lambda, vdh Colibri Master Signature, Mutech Hayabusa,
-Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
-Assorted cables including Skogrand, Kubala-Sosna, Audience FrontRow; Audience FrontRow, Genesis Advanced Technologies , Goldmund and Ensemble Power Cords
-Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz 3 racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA OHIO Class 2.3+ platforms. -
Gotta have at least one linear tracker, the Airtangent seems to still be available, if not, the runner up would be the Kuzma Airline. 2nd would be the SAT and the 3rd whatever Graham's best arm is nowadays. The wild card would be a high-mass arm in place of #2 or 3. In that case it would probably be a Schroeder. -
I have a TW Acustic Raven AC and prior to tearing it down for a move I had a TW arm and a SME 3012R. I recently picked up a EMT 997 tonearm. So those are my three choices, with an option of one more
Comment
-
Tri-Planar, TW 10.5, Ikeda. I have the Tri and hope to buy the TW next year. All on a TW Acustic AC 3Turntable: TW Acustic TT with Ref motor & controller; Tri-Planar Arm; Transfiguration Proteus Cartridge (repaired and re-tipped by AnaMightySound), Massif Record Weight, PS Audio Stellar Phono Preamp; KLAudio Ultrasonic Record Cleaner.
Digital: Bluesound Vault-2 Music Server & Streamer
Amplification: VTL 6.5 preamp Series II, Pass Labs 150.8 Amp
Loudspeakers: Piega C711 Loudspeakers
Isolation: Symposium Osiris Rack; Symposium Platforms and Roller Blocks and grade 2.5 Balls
Misc: Acoustic Revive RR-888 Low Frequency Pulse Generator, Synergistic Research 12 UEF SE Line Conditioner, Level 3 HC AC Cord and Level 3 Atmosphere power cords, Synergistic Carbon fiber wall plates, Synergistic Research Orange Outlet, Furutech NCF Booster Braces, synergistic Research Galileo and Atmosphere X Euphoria Level 3 Balanced ICs, Synergistic Research Euphoria Level 3 Speaker Cables, Synergistic Research Cable Risers.
Sennheiser HDV 650 Headphone Amp; Sennheiser HD800s Headphones.Comment
-
Any more than 2 (stereo/mono playback) is an overindulgence.
Dynavector DV20x2L MC cartridge - Genesis G7.1f speakers - Marantz Reference PM-KI-Pearl Int. Amp. - Oracle Audio Paris MkV turntable - Various Morrow & Valab/King cablesComment
-
I'll take a pair of whatever the current top of the line Grahams are. One for Stereo, One for mono. I'd rather have a third leg than a third arm.
Magnepan 1.6 QR Loudspeakers, Amherst A-2000 MOSFET 150 WPC Amp, Conrad Johnson PV-10A Modded Tube Line & Phono Stage, Electrocompaniet MC II Class A Head Amp, Audio Technica AT-OC9XML Cart (Stereo) , Graham Engineering 2.2 Tonearm (Stereo) , VPI Aries-1 Turntable (Stereo) , VPI Clamp, Denon DL-102 Cart, (Mono) , Luxman Tonearm (Mono) , Kenwood KD-500 Turntable (Mono) , Michell Clamp, Marantz 20B Analog FM Tuner, Pioneer SACD, Onkyo DX-6800 CD Transport, DIY 24B/192K DAC, Sennheiser HD-650 Headphones, Headroom Max Balanced Headphone Amp, DIY Silver InterconnectsComment
-
I'm in Rob's camp, just can't decide. I would have one linear tracker, one 9-inch and one 12-inch arm. But I could easily go with three pivoted arms too.Myles B. Astor, PhD, Administrator
Senior Editor, Positive-Feedback.com
________________________________________
-Zellaton Plural Evo speakers
-Goldmund Telos 440 and 1000 Nextgen mono amps
-Goldmund Mimesis 37S Nextgen preamplifier
-Doshi EVO and Goldmund PH3.8 phonostage
-VPI Vanquish direct-drive turntable
-VPI 12-inch 3D Fat Boy dual pivot tonearm, VPI 12-inch 3D Fat Boy gimballed and SAT LM-12 arm
-Lyra Atlas SL Lambda, vdh Colibri Master Signature, Mutech Hayabusa,
-Technics RS1506 with Flux Magnetic heads, Doshi V3.0 tape stage (balanced)
-Assorted cables including Skogrand, Kubala-Sosna, Audience FrontRow; Audience FrontRow, Genesis Advanced Technologies , Goldmund and Ensemble Power Cords
-Accessories including Stillpoint Aperture panels, Cathedral Sound panels, Furutech NCF Nano AC receptacles; Silver Circle Tchaik 6 PLC, Symposium ISIS and SRA Craz 3 racks, Audiodharma Cable Cooker, Symposium Ultra and assorted SRA OHIO Class 2.3+ platforms.Comment
-
Having lived with first a Goldmund T3F and then for the last twenty years, I can say that even the best of the tangential arms have their own set of pluses and minuses. Air and extension at the top are always phenomenal; however, in many instances bass will suffer to some degree. This is to say that all mechanical designs will have inherent tradeoffs, some less than others. All things being equal, I would probably retain the Rockport and add one of the Swedish Audio Technology arms (if you giving me free rein) and finish with a Kuzma 4-Point.Rockport Sirius turntable, Lyra Atlas SL cartridge, Audio Note M9 SE Phono stage, Audio Note M10 (Signature) linestage, EMM Labs TX2/DA2 digital, Audio Note Balanced Kegon amps, EMM Labs MTRX amps, Acapella Triolons, Jorma Prime and Odin 2 cables, Stage 3 Kraken power cords, HB Marble Powerslave, Finite Elemente Pagode Reference stands and Cerabases, Halcyonics active isolation bases, HRS Equipment stand, Stillpoints Ultra 6 footers, Furitech cable isolators and plugs, Loricraft and Audiodesk vinyl cleaners, Yamaha CT7000 Tuner.Comment
Comment