Coming In December From Magico

[MylesBAstor]

[tom_hankins]

S3 mkii ?

[MylesBAstor]

That's my guess. But what do I know? Looks like the new rounded top like in the S5 but the bass drivers look like from the M3 series. Could be as both are 7-inch drivers.

[Rhapsody]

Yes, it is the S3 MKII. Pricing and lead time for first delivery has not been announced yet, probably in another week or so.

[MylesBAstor]

December 2016 –Hayward, California USA

Magico S3 Mk II

Floor Standing, 3-Way Loudspeaker (Four Driver) Design


HAYWARD, CA – Magico, the Leader in High-Performance Loudspeaker Design and Manufacture, is pleased to announce the new S3 Mk II.


The S3 Mk II nestles in between the S1 Mk II and S5 Mk II and features all of the advanced design elements of the S-Series Mk II models, including a new 9-inch bass driver with the lowest measured distortion born from the design and engineering theories applied to the limited-edition, 10th Anniversary

M-Project.

The S3 Mk II’s superlative high frequencies are provided by a 1-inch Magico diamond-coated beryllium-diaphragm tweeter that offers matching sensitivity, wide dispersion, and increased power handling over the original S-series tweeter. A new aluminum housing for the magnet structure minimizes overall resonance and improves the isolation parameters for the tweeter dome element. The long-throw voice coil enables lower distortion and optimal cutoff frequencies that enhance driver integration with the midrange driver.


Magico’s extraordinary midrange reproduction is attained from a proprietary 6-inch driver that also sets a new benchmark for measured performance. The cone material is formulated using Multi-Wall carbon fiber and a layer of XG Nanographene, which when combined is 20% lighter and 300% stiffer than the previous S-series cone designs. The purpose-built sub-enclosure is made of a proprietary polymer material which provides an isolated and optimized environment for the midrange driver to operate within.


Deep, powerful, and accurate bass frequencies result from two newly designed 9-inch Magico bass drivers that are produced with advanced manufacturing techniques using the same new Multi-Wall carbon, Nanographene cone. The powerful magnet structure controls a 5-inch pure Titanium voice coil that has a 1/2-inch of linear excursion and produces clean, undistorted sound pressure levels up to 112dB @ 50Hz/1-meter.


The monocoque enclosure of the S3 Mk II is formed from a single piece of extruded aluminum that is 3/8-inch thick and 12-inches in diameter. The new aluminum top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves. A massive base plate incorporates a newly designed 4-point outrigger support system that lowers the speaker’s center of gravity and increases overall stability, resulting in a lower noise floor and increased dynamic range.


All four drivers in the S3 Mk II are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that utilizes state-of-the-art components from Mundorf of Germany. The dividing network maximizes frequency bandwidth while preserving phase linearity and minimizing intermodulation distortion. Individual driver performance and the loudspeaker in its final form are tested and optimized for acoustical, mechanical, electromagnetic, and thermal behaviors using the latest state-of-the-art Finite Element Analysis simulation testing equipment.


The S3 Mk II is available in two separate finishes: M-Cast (textured powder coat) and M-Coat (smooth high-gloss paint).


SPECIFICATIONS

Driver Complement

Tweeter 01” MBD7 Diamond Coated Beryllium Dome (x1)

Midrange 06” M390G Graphene Nano-Tec Cone (x1)

Bass 09” MAG9058RTC XG Nanographene (x2)

Measurements

Sensitivity:88dB

Impedance: 4-ohms

Frequency Response:XX Hz – XX kHz

Minimum Power:50 Watts

Dimensions:48” (H) x 14” (D) x 15” (W)

122cm (H) x 36cm (D) x 38cm (W)

Weight: XXX pounds

XXX Kg

Suggested Retail:$ 28,000 /pair (M-Cast)

$ 32,000 /pair (M-Coat)

Ship Date (estimate): Q1 2017

About Magico, LLC

Magico was created over a decade ago for the sole purpose of leading a no holds-barred assault on what is possible in contemporary loudspeaker design. Inspired by the unique vision of Industrial designer and accomplished musician Alon Wolf, every Magico product is designed against the true standard of perfect audio reproduction – live music. At Magico, we strive to lead in the creation, development, and manufacture of the most elegant and technologically advanced loudspeaker systems in the world. Each product expresses our passion to craft uncompromising devices that reveal the music as never before.





For more information please contact Peter Mackay, V.P. Global Sales and Marketing at Magico LLC. Telephone: 1-510-649-9700, Ext 104 or visit us at www.magico.net